Our Equipments

Ambient Air Quality Monitoring Lab

SPECIFICATIONS

Air Quality Monitoring Station to measure PM 2.5, PM10 NO-NO2-NOx, SO2 and CO, Temp., Wind Direction, Bar. Pressure, Relative Humidity, Solar Radiation & Precipitation Range.

Preset Ranges : 0-0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50 and 100 ppm
0-0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100 and 150 mg/m3

Custom Ranges : 0-0.05 to 100 ppm 0-0.1 to 150 mg/ m3

Response Time :
40 seconds (10 seconds averaging time)
80 seconds (60 seconds averaging time)
300 seconds (300 seconds averaging time)


Weather Station – Davis Instrument

SPECIFICATIONS

Console Operating Temp +14° to +140° (-10° to +60°C)

Display Temp +32° to +140° (0° to +60°C)

Non-Operating Temp -5° to 158° (-20° to +70°C)

Current Draw 0.67 mA average, 15 mA peak (plus 80 mA for display lamps, plus 125 mA for each optional wireless transmitter received by the console) at 4 to 6 VDC


Weather Station – ZOGLAB HWS3000 Handheld Weather Station

SPECIFICATIONS

Fully fixed, Robust and durable stick type design T Measuring Range -30ºC ~ 50ºC

Measurement for temperature, humidity, pressure and wind RH Measuring Range 0% RH ~ 100% RH ±3% RH (10%RH ~ 90%RH)

Top ultrasonic resonant wind sensor in the market Pressure measuring Range 300hPa ~1100hPa

Build-in digital compass and accelerometer Wind speed measuring range 0~50m/s

Support Bluetooth and Wi-Fi wireless communication Wind direction measuring accuracy 0~360º


PM10 Analyser – IPM 115

SPECIFICATIONS

Particle Size: Below 10 microns on filter paper and bigger than 10. Micron will be collected in a separate sampling lid, through cyclone separator.

Flow Rate : 0.9 to 1.2 meter cube /min.

Automatic Sampling : By – 24 hours programmable timer.


Thermoelectric Gaseous Sampling Kit - IPM 117

SPECIFICATIONS

Flow Rate: 0.3 to 3 LPM, accuracy: 2% of span.

Flow Control: Four inlet and one outlet with built in needle valves for flow control of each unit.

Measuring Gases: NOX, NO2 & SO2


Ambient Fine Dust Sampler Model PEM-ADS 2.5µ/10µ (Ver.1.2)

SPECIFICATIONS

Model PEM-ADS 2.5µ/10µ for measurement of mass concentration of fine particulate matter having an aerodynamic diameter less than or equal to a nominal 2.5 micrometer.

Actual volumetric Flow rate: Instantaneous value updated every 5 seconds, 5mt average out of specs.


Triple Plus+ Gas Detector

SPECIFICATIONS

  • 4-gas: Flam/O²/H²S/CO
  • Extensive range of other sensor options available
  • Three piercing and distinctive levels of alarm
  • Large four gas, simultaneous text display
  • Sealed lead acid battery with no memory effects
  • Easy to use Menu
  • IP65 water and dust ingress protection and floats in water
  • Internal and external pump options available for remote sampling
  • Infra red flammable and CO2 gas sensor available


Kane 900 Plus Hand-Held Combustion Analyser

SPECIFICATIONS

  • Oxygen to 21%
  • Carbon Monoxide (CO) to 10,000ppm with hydrogen compensated sensor (alternatively CO to 100,000ppm with high range sensor)
  • Nitric Oxide (NO) to 5000ppm with calculated NOx (alternatively NO to 100ppm with better low range accuracy)
  • Sulphur Dioxide (SO2) to 5000ppm
  • (Alternatively any toxic sensor can be replaced with a 1000ppm Nitrogen Dioxide (NO2) sensor)
  • Inlet Temperature
  • Flue Gas Temperature
  • Differential pressure


Stack Sampler (GTI-121)

SPECIFICATIONS

  • Ambient to 600o C-Digital Pyrometer
  • 3 to 60 m/sec.
  • Thermocouple sensor in SS304 casing, length of insertion 0.6m, 2m long cable
  • Digital with 0-2000mm of H2O range
  • Calibrated S-Type Pitot Tube, SS304, 0.6m length extendable to 1.2m
  • 2-30 1pm collection of themble type filter upto 0.3 micron rating
  • 0.2-3 1pm collection in a set of Borosilicate glass impingers
  • Acrylic body rotameter with2% FSD accuracy, 0-30 1pm for particulate and 0-3 1pm for gases
  • Made from SS304 tube suitable to hold either cellulose filtration thimble (size 28mm 1D x 100mm) or glass micro fiber thimble (size 19mm 1D x 90mm)
  • A set of 3 stainless steel nozzles
  • 0-60 minutes, 1 second readout with
  • start and stop switches.
  • 1No. of 240ml capacity and 3No. of 120ml capacity borosilicate glass impingers accommodated in ice tray, placed on the rear side of instrument panel with provision to keep ice.
  • Monoblock Rotary Vane Type, oil lubricated, 0.5HP single phase motor (230v) with more than 50 1mp free flow capacity


SGM-1P Ozone Level Monitor

SPECIFICATIONS

  • Ambient Ozone : Range 10ppm
  • Display: 3½ LCD Digital 12mm high
  • Working Temperature : 0~50ºC
  • Accuracy : +2% at Constant Temperature
  • Size & Weight : 10 x 7 x 3½ Cm. x 210 gm.
  • Sensor type : Electrochemical
  • Alarms (Two) : 1. Both Visual & Audible 2. Alarms settable throughout range
  • Power : 4Nos. x 1.5Volts, AAA Dry Cells


FGM Flue Gas Monitor

SPECIFICATIONS

No. of Gases to Measures
Gas Range Resolution
O₂ 0~25% 0.1
CO 0~2% 0.001%
SO₂ 2000ppm 1ppm
NO 2000ppm 1ppm
NO₂ 800ppm 1ppm
HC 0~5% 0.1%

  • Display : 20x4 Alphanumeric with Backlight
  • Power : 6V Rechargeable Battery
  • Low Battery : Indication provided
  • Pump : 8” HG Column suction, 1ltr./min flow
  • Sensors : Electrochemical of 2 year life for O₂ & 3 years life for Toxic
  • Size &Weight : 26 x 14 10cm x 1.8 kg. Nett.
  • Working Temp. : 5 to 45º C.
  • Temp. Range : 0 ~ 600ºC Sample Temperature
  • Temp. Resolution : 1ºC
  • Probe Length : 60Cm. Copper / SS Tube
  • Probe : Cooler and Filter Integral
  • Rubber Hose : 1.5m Length


CAAPEMS-91 Continuous Ambient Air Pollutant Eminence Monitoring System

SPECIFICATIONS

No. of Gases to Measures
Gas Range Resolution
SO₂ 0~1000 µg/m3 2µg/m3
CO 0~500mg/m3 0.01mg/m3
NO₂ 0~1000 µg/m3 2µg/m3
O3 0~100 µg/m3 2µg/m3
PM1.0 0~1000 µg/m3 1µg/m3
PM2.5 1~1000 µg/m3 1µg/m3
PM10 1~2000 µg/m3 1µg/m3

  • Controller : Microprocessor & Programable Logic Controller
  • Display : TFT, 4.3-Inch Touch Screen WQVGA Color
  • Working Temp.: 0ºC to +40ºC Ambient
    Working Temp.: 0ºC to +50ºC Ambient with Cooler
  • Measurement Technique : Continuous Sampling Method
  • Ambient Relative Humidity : Max. 90%, non-condensing
  • Accuracy : ±2% at constant temperature
  • Power : 220V 50Hz, 5Amp.500W. Stabilized Power Supply required
  • Recording Output : RS485 MODBUS
  • Size : 500 x 350 x 350mm Basic (Configuration dependent) + Sampling Head
  • Weight : Approx. 5 Kgs. To 10 Kgs.(Configuration Dependent)
  • Flow : 1 – 2 LPM


MultiRAE Lite Wireless Portable Multi-Gas Monitor

SPECIFICATIONS

SENSOR SPECIFICATIONS:
Gas Range Resolution
VOC 10.6 EV 0~1.000ppm 1ppm
Carbon Dioxide 0~50,1000ppm 100 ppm
Carbon Monoxide 0~500 ppm 1ppm
Hydrogen Sulfide 0~200ppm 0. 1ppm
Nitrogen Dioxide 0~20ppm 0. 1ppm
Sulfur Dioxide 0~20ppm 0. 1ppm

  • Size: Pumpad Model 7.6”H x 3.8” W x 2.6” D (193x96.5x66mm)
  • Weight: Pumped model 31oz (880g)
  • Sensors:
    • Over 25 Intelligent Interchangeable field
    • Replaceable sensors including PID for VOCs.
    • Electrochemical sensors for toxic gases and oxygen.
    • Combustible LEL and NDIR Sensors, and
    • CO2 NDIR Sensor


SIDEPAK PERSONAL AEROSOL MONITOR AM520

SPECIFICATIONS

Measure aerosol concentrations corresponding to PM1, PM2.5, respirable, or PM10 size fractions
Lightweight and portable
Manual and programmable data logging functions
Single point data logging capability
Handheld unit
Aerosol concentration range 0.001 to 150 mg/m3


TSI DUSTTRAK II AEROSOL MONITOR 8532

SPECIFICATIONS

Measure aerosol concentrations corresponding to PM1, PM2.5, respirable, or PM10 size fractions
Lightweight and portable
Manual and programmable data logging functions
Single point data logging capability
Handheld unit
Aerosol concentration range 0.001 to 150 mg/m3


TSI DUSTTRAK II AEROSOL MONITOR 8532

SPECIFICATIONS

Gas Range Resolution Sensors
O3 0~1000 ug/m3 1ug/m3
H2S 0~100 ug/m3 1ug/m3
SO2 0~200 ug/m3 1ug/m3
CO2 0~1000 PPM 1 PPM
SO2 0~500 ug/m3 1ug/m3

Size: 190 * 80 * 25mm
Weight: 135 gm.


Cirrus Research: 1710 Sound Level Meter

SPECIFICATIONS

Simultaneous Leq, SPL, Lmax, Peak and Ln's (L10, L50, L90, etc).
"A", "C" and "Z" (flat from 10 Hz to 20 kHz ± 1.5 dB) frequency weightings on channel 1.
"C" weighting on channel 2 for simultaneous Peak measurements.
RMS "Fast", "Slow" and "Impulse" time weightings.
Clear graphical display with backlight.
Rugged cast aluminum case.
Seven Measurement ranges, covering: 21 to 140 dB(A), Peak 143 dB(C).
Noise floor 18 dB(A).
Powered by two AA cell batteries - over 30 hours operation.

Dimensions: 13.3" x 2.9" x 0.9", 15.8 ounces
340mm x 75mm x 25mm, 450g
Range: 30 to 70dB, 60 to 100dB, 90 to 130 dB


Cirrus Research: 811C Sound Level Meter

SPECIFICATIONS

Simultaneous Leq, SPL, Lmax, Peak and Ln's (L10, L50, L90, etc).
"A", "C" and "Z" (flat from 10 Hz to 20 kHz ± 1.5 dB) frequency weightings on channel 1.
"C" weighting on channel 2 for simultaneous Peak measurements.
RMS "Fast", "Slow" and "Impulse" time weightings.
Clear graphical display with backlight.
Rugged cast aluminum case.
Seven Measurement ranges, covering: 21 to 140 dB(A), Peak 143 dB(C).
Noise floor 18 dB(A).
Powered by two AA cell batteries - over 30 hours operation.

Dimensions: 13.3" x 2.9" x 0.9", 15.8 ounces
340mm x 75mm x 25mm, 450g
Range: 30 to 70dB, 60 to 100dB, 90 to 130 dB


Vibration Meter – VB8200

SPECIFICATIONS

  • Includes remote vibration sensor
  • Two velocity ranges: 20 and 200mm/s
  • Two acceleration ranges: 200 and 2000 m/s2


Flame Photometer – CL 22D / 26D

SPECIFICATIONS

For measurement of concentration of Alkali and Alkali earth metals (Sodium, Potassium, Calcium and Lithium)
CL 22D Geological and Agricultural Soil Testing: Food & Beverage Testing; Pollution Monitoring & Control; Cement Coal, Ash, Fuel & Crude Oil, Grease, Glass, Chemicals, Acids, Pharmaceutical & Other Industries.
CL 26D Biochemical Analysis like Electrolytes in Serum, Body Fluids, Nutrient Solutions for Cultivation of Anti-biotics.
CL22DCL 26D
Channel Element LO Med Hi Serum Urine
1 Na 100 10 1 0-200 0-200
2 K 100 10 1 0-10 0-200
1 Ca - - 15 - -
2 Li - - 1 0.4 -


pH Meter – LI 612

SPECIFICATIONS

pH
Range 0 to 14
Resolution 0.001
Accuracy ± 0.002
Repeatability ± 0.002
Stability ± 0.005 in 8 hours


UV-VIS Spectrophotometers – SL 150 / SL 159

SPECIFICATIONS

Microcontroller based wavelength selection.
Stable single beam optics.
Simple selection of four position sample holder.
Accommodates cuvettes of upto 50 mm path length.

SPECTRAL
Range 190 to 1100 nm
Bandwidth 2 nm
PHOTOMETRIC
Range 0 to 1.999 Abs.
Repeatability ± 0.002 Abs. at 1.0 Abs.
Stray light > 2.000 Abs at 200 nm with 1.2% KCl


Stainless Steel Sieves, Stackable – 500 µ

  • Side frame: 1 mm AISI 316 stainless steel.
  • Bottom frame: 3 mm AISI 316 stainless steel
  • Finish: Electro polish
  • Handles
  • The sieves are stackable
  • Reinforcement for the net
  • Dimensions: L x W x H: 40 x 20 x 7 cm
  • Weight: 1,5 kg
  • Standard net sizes: 500 - 2000 microns.


Celestron LCD Digital Microscope

SPECIFICATIONS

  • Compound (biological) microscope
  • USB cable for transferring images to a PC
  • 40 to 400 power – up to 1600 power with digital zoom
  • AC adaptor to power the microscope
  • 3.5″ (88mm) LCD screen with 4x digital zoom
  • Carrying case included
  • Built-in digital camera – 2 mega pixels
  • Weight – 51oz (1446g)
  • Top and bottom LED illumination
  • Mechanical stage – 3.5″ x 3.5″ (88mm x 88mm)
  • 128MB internal storage memory
  • SD card slot
  • 5 prepared slides
  • Objective lens – 4x, 10x, and 40x
  • 6 position color filter wheel


Electronic Balance - OHAUS PIONEER PA214C

SPECIFICATIONS

The OHAUS PioneerTM Series of analytical and precision balances are designed for basic routine weighing in a variety of laboratory, industrial and education applications. With the right combination of performance and features, the OHAUS Pioneer offers uncomplicated performance for all your basic weighing needs.



GPSmap – 76Cx

SPECIFICATIONS

Unit dimensions, WxHxD: 2.7" x 6.2" x 1.2" (6.9 x 15.7 x 3.0 cm)
Display size, WxH: 1.6" x 2.2" (4.1 x 5.6 cm)
Display resolution, WxH: 160 x 240 pixels
Display type: 256 color transflective TFT
Weight: 7.7 oz (218 g) with batteries
Battery: 2 AA batteries (not included)
Accepts data cards: 128 microSD™ card (included)
Waypoints/favorites/locations: 1000


Garmin Oregon 550

SPECIFICATIONS

The navigator with the photographic memory - Oregon 550 combines rugged outdoor touchscreen navigation with a 3.2-megapixel digital camera. Add high-sensitivity GPS, barometric altimeter, 3-axis electronic compass and microSD card slot. The result is a multipurpose device that will make your biggest adventures even more memorable

Connectivity USB
Interface NMEA 0183
GPS Functions Tide Tab, electronic compass, elevation, altimeter
Antenna Built-in
Features Barometric altimeter, built-in camera, photo viewer, custom POIs, automatic routing, hunt/fish calendar, Garmin HotFix, Geocaching, Wherigo
Built-in Memory 850 MB
Supported Memory microSD
Compatible MapSource City Navigator, MapSource BlueChart g2
Waypoints 2000
Tracks 200
Tracklog Points 10000
Routes 200
Trip Computer Sunrise/sunset times, sun/moon positions


Conductivity Meter – CM180

SPECIFICATIONS

Range 0 to 20, 200 mS
Accuracy ± 1% full scale
Repeatability ± 1% full scale
Readability 1 Unit


Dissolved Oxygen Analyser – PE 135

SPECIFICATIONS

Range 0 to 20 ppm
Accuracy ± 0.1 ppm
Repeatability ± 0.1 ppm


BOD Incubator

SPECIFICATIONS

Doubled walled inner chamber made of S.S and other chamber made of Mild steel finished in powder coating epoxy paint. Full length inner acrylic door and outside metal door with magnetic gasket and lock. Removable S.S tray Units consist of digital display temp. Indicator cum controller with PT-100 sensor, Automatic chamber light and forced air circulation fan for uniform temp. Hermatically sealed compressor. At the bottom castor wheels for easy mobility. Temp. range 5º-50ºC.


TDS Analyser – HI 9034

SPECIFICATIONS

Range 0.0 to 199.9 mg/L / 0 to 1999 mg/L 0.00 to 19.99 g/L


D.O Analyser – HI 93732

SPECIFICATIONS

Range 0.0 to 10.0 mg/L (ppm)
Resolution 0.1 mg/L
Accuracy ±0.2 mg/L ± 3% of reading
Typical EMC ±0.1 mg/L


COD Digester – IPM 1915

SPECIFICATIONS

Capacity 15 Samples
Sample cap. 20 ml.
Temperature Ambient to 400 0 C, /- 10,
Timer Range 9.9 Hours. Auto shut off and Buzzer.
Display LCD display in Temp. And Timer.


Turbidity Meter –OBS 3+ with Data Logger

SPECIFICATIONS

Turbidity: 0 to 2000 NTU

Concentration
Mud 0 to 2500 mg/l
Sand 0 to 50 g/l


Aquaread

SPECIFICATIONS

The new GPS Aquameter from Aquaread is the world’s most sophisticated, yet easy to use multiparameter water quality test system.

Temperature Seawater Specific Gravity
Turbidity pH
Atmospheric pH/mV
Turbidity N.T.U
Resistivity ORP
mg/L Dissolved Oxygen (DO) Latitude/Longitude
% Saturation DO Height above
Electrical Conductivity (EC) Time/ Date
Total Dissolved Solids (TDS) Depth
Salinity Absolute EC


ADCP (Current Meter)

SPECIFICATIONS



Echo Sounder – 1500C

SPECIFICATIONS

The Bathy-1500 is a portable high-resolution, precision echo sounder. It is designed exclusively for hydrographic marine surveys up to 5,000 meters of water depth. Available a single frequency or dual frequency model


Niskin Water Sampler

SPECIFICATIONS

Non-metalic, free-flushing sampler recommended for general purpose water sampling. These samplers can be individually or serially attached on a hydrocable and activated by messenger or placed in any kind of multisampling system and activated by remote or pre-programmed command.

The Standard PVC Niskin Type Sampler is made of grey PVC (RAL 7011) and features a spring closure made of latex tubing with optional stainless steel spring closure, clamp bolts for attachments on a cable and mounting blocks for Multisampling System attachment


AQUA READ AP-2000 / AP-2000-D

SPECIFICATIONS

Ammonium / Ammonia, CDOM / FDOM.
Chloride, pH
Nitrate, ORP
Fluoride, Conductivity
Calcium. TDS
Turbidity, SSG
Chlorophyll, Res
Blue Green Algae, Salinity
Rhodamine, ODS
Fluorescein, Temperature
Refined Oil, Depth


Electronic Balance - OHAUS PIONEER PA214C

SPECIFICATIONS

The OHAUS PioneerTM Series of analytical and precision balances are designed for basic routine weighing in a variety of laboratory, industrial and education applications. With the right combination of performance and features, the OHAUS Pioneer offers uncomplicated performance for all your basic weighing needs.